Star LAN Printer
This article will guide you through setting up your Star LAN printer and setting up static IP
Basic Unboxing
- Unbox printer and ensure all cables are in packaging
- This includes power cable, DK cable, VGA cable, and printer paper
- Connect device to Ethernet
- This will be wired directly from your router or Ethernet switch to your printer
Network Set Up
- Navigate to your POS
- Ensure that the POS is on the same network as the printer
- Scan for Printer
- Log into POS
- Click Menu Icon in the top left
- Hardware
- Printers
- Select Star and WiFi
- Scan
- Select Printer
- Enter printer name, printer group, cash drawer name, printer brand, and model
- Select Add in the top right
- Set up Printer
- Select printer
- IF Receipt Printer enable “Receipt Printing”
- Select terminals (stations) this printer is allowed to print from
- Select service areas this printer is allowed to print from
Setting up Static Network
- Hold down feed button while powering on device
- Save the paper that prints out with the IP parameters to complete the following steps
- Navigate to Printers section in Hardware
- Enter Username and Password
- User: admin
- Password: root
- Resetting this password is not necessary. Click Cancel
- Click IP parameters in the left
- Select the “Static“ option
- Enter IP information from the print out in the first step
- Select Save on the Left Side menu
- Chose the option “Save => Configuration printing => Restart device”
Did this answer your question?
How can we improve this article?